What to do when there is an error in the toner cartridge of the copier

November 01, 2022

Copiers are Office Supplies, rarely used at home, and copy shops and companies are essential appliances. There are many brands of copiers, and copiers are relatively familiar brands to the public, and many people will choose to buy them. But no matter what kind of product is in operation, there will be some minor problems. It is not worthwhile to ask a professional master to fix it. Of course, it is more convenient and save money to fix it yourself. Among them, what to do if the Toner Cartridge error occurs in the copier, this problem has been encountered by many people. , the editor will take you to see what solutions there are.

Copier Toner Cartridge error means that it occurs after adding powder. Due to the poor quality of the powder added, the dust falls to the charging point and the corona wire cannot be charged. The machine reports an error toner cartridge error. . The contact of the toner cartridge is deformed, and an error is reported when starting up: the toner cartridge is wrong, and the contact on the left side of the toner cartridge needs to be repaired. The high voltage board is faulty and needs to be replaced.

The copier prompts that the toner cartridge is wrong, there are several possibilities:
1. The toner cartridge is not installed correctly, reinstall the toner cartridge after pumping;
2. The dust falls on the corona wire at the charging point, the corona wire cannot be charged, and the machine reports an error in the toner cartridge. It is necessary to disassemble the drum frame and clean the grating net and corona wire.
3. The contact of the toner cartridge is deformed, and an error is reported when starting up: the toner cartridge is wrong, and the contact on the left side of the toner cartridge needs to be repaired. 4. The high-voltage board is faulty, and the high-voltage board needs to be replaced.

Note: Such electronic products are precision equipment, and the manufacturer recommends contacting professional after-sales personnel for inspection and replacement to avoid unnecessary losses. The copier prompts because the powder under the barbed wire is not cleaned, clean it and install it. You have to disassemble the toner cartridge. First, use a small flat screwdriver to lift off the small silver retaining spring on the side of the toner cartridge, and then pull out the middle bearing (just One iron rod), the photosensitive drum (commonly known as the drum stick) of the toner cartridge can be removed and the barbed wire can be seen. There is a bayonet pin on the side of the toner cartridge barbed wire, which is made of plastic, and the barbed wire can be taken off by slowly tilting it down with the flat mouth.

Jiangmen Jinheng Office equipment co.,LTD has been engaged in manufacturing and selling office consumables such as copiers,printers for 15 years.self-developed Toner Cartridge,Printer Cartridge,Copier Toner Cartridge,Toner Cartridge Printer and all kinds of accessories are applicable to international famous brands such as Canon.HP.RICOH.XEROX.SUMANG.BROTHER etc.
For more details about the product, please contact us:
Tel :+86-0750-6108992
Fax :86-0750-6325993
Mobile Phone :+8613822438293
Email :sales@jm-jinheng.com

Author:

Ms. Maggie

E-mail:

sales@jm-jinheng.com

Phone/WhatsApp:

8613822438293