Some maintenance knowledge of the toner cartridge of the copier cartridge manufacturer

September 29, 2022

In general, when we repair the copier, we can't avoid removing the Toner Cartridge of the copier cartridge manufacturer, in case we accidentally break the toner cartridge, what should we do? Or some times, our copier with a long time, the toner cartridge aging, which should do? In fact, the structure of the toner cartridge of many copiers is similar, easy to damage the parts, just drum core, waste paper window, and scraper, we need to learn to repair the toner cartridge method to easily repair the copier.

The toner cartridge of the copier has the problem of work fatigue, therefore, the continuous working time should not be too long, if the workload is very large, you can take a break after working for a while and then continue to output.

toner cartridge

Regularly clean and maintain the toner cartridge by carefully removing the cartridge assembly and wiping the surface clean with skimmed cotton, but not with force to prevent the surface of the cartridge from being scratched. Then, wipe the surface of the toner cartridge with degreasing cotton dipped in a special cleaner for toner cartridges, the wiping should be done in a spiral circular way, and the cleaner should be wiped clean with degreasing cotton immediately after wiping. Gently pat a layer of talcum powder on the surface of the drum with a gauze containing talcum powder and you can put it back into use.

Normally, when replacing toner, pay attention to cleaning up the waste powder in the waste powder collection bin, and clean up the bin immediately when you find that the output is "leaking powder". This is because when too much waste powder accumulates, the first thing that will happen is the phenomenon of "powder leakage", if you continue to use it, because the waste powder contains paper dust, fibers and other dirty things, rougher, and the toner cartridge friction for a long time, and more and more tight, the pressure is getting bigger and bigger, and finally the photographic film on the surface of the toner cartridge will be worn off, the toner cartridge will be damaged.

The copier cartridge manufacturer would like to remind you that when in the process of replacement, found that there is toner falling outside the equipment, we are good to use a hoover to suck out, and then use pure alcohol to scrub again afterwards. In addition, the whole replacement process is good to be carried out in a darker studio to prevent the photoconductor drum from being exposed. In addition, the general toner cartridge is valid for two and a half years when it is not unsealed, once it is unsealed the validity period is only 6 months, users should pay attention to the use of the cartridge within the validity period to ensure the quality of copying.

Author:

Ms. Maggie

E-mail:

sales@jm-jinheng.com

Phone/WhatsApp:

8613822438293